As we know, CWDM SFP (CWDM) is on the SFP transceivers or socket switch or router port, it is a kind of technology of hybrid protocols and data rate, allow the multi-channel, combination, and through the optical fiber cable transmission.
CWDM SFP use SFP interfaces to connect devices, at the same time, double LC/PC type optical fiber connector software, optical network connection.CWDM SFP for port connected to the optical fiber network, the typical CWDM SFP as cisco can support gigabit Ethernet and fiber channel at the same time. It is compatible SFP with fast Ethernet, SONET OC – 3 and OC – 12, and STM and SDH STM – 1-4 standard.
The purpose of CWDM SFP transceivers basic characteristics are hot pluggable and double LC interface, and compliant with IEC60825-. The transmitter center wavelength ranges from 1270nm to 1610nm and the receiver PIN or APD is single +3.3V power supply, PECL data interface; Operating temperature range s from -5 to + 70 degrees;
CWDM SFP transceivers consists of three parts: an uncooled CWDM DFB laser, PIN photodiode integrates a trans resistance preamplifier (TIA) and single-chip microcomputer control unit. This optical transceiver integration in a module to send and receive channel. In the sender, serial data stream is transmitted to the the laser driver. Laser driver bias and modulation of refrigeration directly modulated laser (DML), according to the LC connector industry standard, make the data transmission of single-mode fiber. At the receiving end, the data flow from a PIN or restore the avalanche photodetector (APD), transmitted to trans resistance amplifiers, rear and then passed to the amplifier.The module has to be hot-swappable SFI standards for electrical interfaces. This integrated optical transceiver to provide signal transmission rate from 100 Mbps to 3.1 Gbps of high-speed serial link and the module in line with the small pluggable (SFP) multi-source agreement (MSA).
We know that typical CWDM SFP transceivers including CWDM-SFP-1470, CWDM-SFP-1490, CWDM-SFP-1510, CWDM-SFP-1530, CWDM-SFP-1550, CWDM-SFP-1570, CWDM-SFP-1590, CWDM-SFP-1610. Cisco CWDM SFP is a series of single-mode transceiver covers from 1470nm to 1610 nm wavelength applications, they are different colors to identify them, these CWDM SFP to gigabit Ethernet and 1/2 GBPS fiber channel applications. And another brand is Juniper CWDM SFP, it includis SFP-1GE-LH-CWDM-1270, SFP-1GE-LH-CWDM-1290, SFP-1GE-LH-CWDM-1310, SFP-1GE-LH-CWDM-1330, SFP-1GE-LH-CWDM-1350. The Cisco SFP transceiver and Juniper CWDM SFP transceivers are with excellent quality. Casting CWDM SFP transceivers work on the 80 km, with different wavelengths from 1470 nm to 1610 nm. It is fully compatible with and in its intended functions casting router or switch, and complete the MSA compatible.
Cisco’s may possibly aim at either Gigabit Ethernet or Fiber Channel. Fiberstore supply original CWDM SFP, along with other CWDM SFP transceivers, impressive company like cisco, HP, huawei, juniper networks and etc. Fiberstore, as a famous optical fiber manufacturers, provide many other kinds of fiber optic transceivers like SFP transceivers, GBIC transceiver, CWDM SFP transceivers, DWDM SFP transceivers, SGMII SFP transceivers, SFP+ transceivers, XFP transceiver, X2 transceiver, Xenpak transceiver, and so on. In addition, Fiberstore is making with 30% of the price including all SFP transceivers. So if you want to know more and take action for it immediately. The website is http://www.fiberstore.com/
Article Source: http://www.fiber-optic-transceiver-module.com/
No comments :
Post a Comment